Ten Common faults of impact Crusher and their Solutions

1、impactcrusher starting equipment not turning Check if the material in front of the feeder falls into the broken cavity due to stop vibration, causing the material to jam the rotor. Need to clean up the material in the broken cavity and... ...More>>

Complex swing jaw crusher

The top of the movable arm 1 of the machine is directly hung on the eccentric shaft 3, and the bottom of the movable plate 1 is supported on the thrust plate 4 which is fixedly hinged at one end. When the eccentric shaft rotates, the moving... ...More>>

Wear and complement of Ball in Ball Mill

In order to keep the reasonable grading of steel ball in grinding, the factors affecting ball wear should be eliminated and weakened. When the hardness of grinding material is close to that of steel ball, the wear of ball is the most. There... ...More>>

How to choose the cone liner of cone crusher?

The liner of the cone crusher is easily worn out because of the strong impact. This will lead to uneven product size, reduced production efficiency and increased energy consumption, so the replacement of crusher linings is very important. T... ...More>>

Impact crusher-Blow Bar

Impact crusher is one of the most widely used crusher types. The parts of impact crusher is an important part of impact crusher, which needs to be replaced on time. The breakable parts of the impact crusher include blow bar, etc.Pacts are c... ...More>>

Introduction of ball mill liner

There are many types of mill liners. In order to have a comprehensive understanding of them, they can be roughly classified according to the parts they use and their materials. According to the use of different parts of the liner can be div... ...More>>